What we could confirm
The published values we found, each linked to its source.
| Place | Frost depth | Source |
|---|---|---|
| Senatobia (Tate County) · a footing depth, not a frost line | 13 inches | cityofsenatobiams.gov |
Where the number comes from
IRC R403.1.4, where a county or city adopts the IRC.
Only the coastal counties must adopt and enforce the state building code; many rural areas enforce none. The one local number we found, Senatobia's 13-inch footing depth, isn't a frost value.
Before you dig
- Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Mississippi, that's Mississippi 811.
- Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
- Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
- Don't skip the inspection. Most towns check the open holes before you pour.
Frost line in nearby states
- Alabama 12 inches, set locally
- Louisiana no frost depth; footings at least 12 inches deep
- Arkansas 12 to 24 inches, set locally
- Tennessee 12 inches, set locally
- All 50 states and D.C.
Sources
- UpCodes, Mississippi code adoption summary (codes adopted at the local level)
- ICC adoption map, Mississippi (coastal counties must adopt and enforce the state building code; elsewhere enforcement is voluntary)
- Senatobia (Tate County): building department
- International Code Council, 2021 International Residential Code, Chapter 4 (R403.1.4 and R403.1.4.1)
- NOAA NCEI, U.S. Climate Normals 1991–2020