What building departments in Tennessee require
Each county or city sets its own frost depth in Tennessee. These are the values their permit handouts and code pages list; yours may differ, so check before you dig.
| Place | Frost depth | Source |
|---|---|---|
| Nashville (Metro Nashville-Davidson County) | 12 inches | legisarchive.nashville.gov |
| Knox County (Knoxville area) | 12 inches | knoxcounty.org |
| Maryville | 12 inches | mtas.tennessee.edu |
| Hendersonville | 12 inches | hvilletn.org |
| Spring Hill | 12 inches | springhilltn.org |
| Cheatham County | 12 inches | cheathamcountytn.gov |
| Cumberland County (Cumberland Plateau) | 12 inches | cumberlandcountytn.gov |
| LaFollette (Campbell County) | 10 inches (footings still 12) | lafollettetn.gov |
Where the number comes from
Tennessee has no statewide residential code that sets a frost depth: each county, city or town that adopts a building code fills in its own. That's why the same deck can need deeper footings one town over. (Tenn. Comp. R. & Regs. 0780-02-23-.02 (2018 IRC, for places without their own code); IRC R403.1.4.)
Every table we found says 12 inches, from Nashville to the Cumberland Plateau and the Knoxville area; LaFollette's says 10. We found nothing published for Memphis or Chattanooga.
Winter in Tennessee
Averages for Nashville (NOAA 1991–2020 climate normals), the same metro as the Tennessee home maintenance checklist.
- 29°F average low in January, the coldest month
- November 5 first 32°F night of fall, on average
- April 3 last 32°F night of spring, on average
- 5 inches of snow a year
The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.
Before you dig
- Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Tennessee, that's Tennessee 811.
- Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
- Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
- Don't skip the inspection. Most towns check the open holes before you pour.
Frost line in nearby states
- Kentucky 24 to 33 inches by zone
- North Carolina 12 inches statewide
- Alabama 12 inches, set locally
- Mississippi no frost depth; footings at least 12 inches deep
- Virginia 12 to 24 inches, set locally
- Arkansas 12 to 24 inches, set locally
- Georgia 12 inches, set locally
- Missouri 18 to 36 inches, set locally
- All 50 states and D.C.
Sources
- Tenn. Comp. R. & Regs. 0780-02-23-.02 (Cornell LII copy)
- Cleveland, TN deck inspection checklist (deck footings minimum 12" deep)
- Nashville (Metro Nashville-Davidson County): building department
- Knox County (Knoxville area): building department
- Maryville: building department
- Hendersonville: building department
- Spring Hill: building department
- Cheatham County: building department
- Cumberland County (Cumberland Plateau): building department
- LaFollette (Campbell County): building department
- International Code Council, 2021 International Residential Code, Chapter 4 (R403.1.4 and R403.1.4.1)
- NOAA NCEI, U.S. Climate Normals 1991–2020