What towns and counties in North Carolina publish
Local building departments repeat the code value in their deck and footing handouts. A few ask for more.
| Place | Frost depth | Source |
|---|---|---|
| Charlotte (Mecklenburg County) | 12 inches | up.codes |
| Raleigh (Wake County) | 12 inches | up.codes |
| Buncombe County (Asheville) · the county's own spec sheet; the state code says 12 | 18 inches | media.buncombenc.gov |
Where the number comes from
The North Carolina Residential Code (2018 NC Residential Code, Table R301.2(1) and R403.1.4) sets the frost depth for the whole state. Your building department applies it, and can require more where the ground calls for it.
The 12 inches is measured from finished grade. Buncombe County (Asheville) prints 18 inches on its own residential spec sheet, so mountain counties may expect more.
Winter in North Carolina
Averages for Charlotte (NOAA 1991–2020 climate normals), the same metro as the North Carolina home maintenance checklist.
- 32°F average low in January, the coldest month
- November 10 first 32°F night of fall, on average
- March 28 last 32°F night of spring, on average
- 3 inches of snow a year
The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.
Before you dig
- Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In North Carolina, that's North Carolina 811.
- Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
- Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
- Don't skip the inspection. Most towns check the open holes before you pour.
Frost line in nearby states
- Virginia 12 to 24 inches, set locally
- South Carolina 12 inches, set locally
- Tennessee 12 inches, set locally
- Georgia 12 inches, set locally
- All 50 states and D.C.
Sources
- 2018 North Carolina Residential Code, Table R301.2(1) (UpCodes copy)
- 2018 NC Residential Code Chapter 4, R403.1.4 minimum depth (12 in below finished grade)
- Buncombe County (Asheville): building department
- International Code Council, 2021 International Residential Code, Chapter 4 (R403.1.4 and R403.1.4.1)
- NOAA NCEI, U.S. Climate Normals 1991–2020