How deep is the frost line in Oregon?

12 to 24 inches, set county by county in the state's residential code. Look up your ZIP code below, or find your county in the table.

Get reminded before the ground freezes. I am Home builds your home's seasonal plan from your ZIP in about a minute: winterizing, outdoor faucets, gutters, each with a how-to. Free, every feature.
Get my plan

Frost line depth by county

From the Oregon Residential Specialty Code (2023 ORSC Table R301.2). Measured from finished grade to the bottom of the footing.

CountyFrost depth
Baker24 inches (2 feet)
Benton12 inches
Clackamas12 inches
Clatsop12 inches
Columbia12 inches
Coos12 inches
Crook18 inches
Curry12 inches
Deschutes18 inches
Douglas18 inches
Gilliam24 inches (2 feet)
Grant24 inches (2 feet)
Harney24 inches (2 feet)
Hood River24 inches (2 feet)
Jackson18 inches · It's 12 inches below 2,500 feet of elevation, where the county's cities are.
Jefferson18 inches
Josephine18 inches · It's 12 inches below 2,500 feet of elevation, where the county's cities are.
Klamath24 inches (2 feet)
Lake24 inches (2 feet)
Lane12 inches
Lincoln12 inches
Linn12 inches
Malheur24 inches (2 feet)
Marion12 inches
Morrow24 inches (2 feet)
Multnomah18 inches · It's 12 inches below 2,500 feet of elevation, which covers Portland and Gresham.
Polk12 inches
Sherman24 inches (2 feet)
Tillamook12 inches
Umatilla24 inches (2 feet)
Union24 inches (2 feet)
Wallowa24 inches (2 feet)
Wasco24 inches (2 feet)
Washington12 inches
Wheeler24 inches (2 feet)
Yamhill12 inches

What towns and counties in Oregon publish

Local building departments repeat the code value in their deck and footing handouts. A few ask for more.

PlaceFrost depthSource
Portland (Multnomah County) · the city is below 2,500 feet; the county is 18 inches above that 12 inches up.codes
Salem (Marion County) 12 inches up.codes
Bend (Deschutes County) 18 inches up.codes
Pendleton (Umatilla County) 24 inches (2 feet) up.codes

Where the number comes from

The Oregon Residential Specialty Code (2023 ORSC Table R301.2) sets the frost depth county by county. Your building department applies it, and can require more where the ground calls for it.

12 inches west of the Cascades, 18 in the southern valleys and central Oregon, 24 east of the Cascades. The 2026 code, optional since October 1, 2026 and required from April 1, 2027, replaces this table; the state's Design Criteria Hub gives the value for an exact address.

Winter in Oregon

Averages for Portland (NOAA 1991–2020 climate normals), the same metro as the Oregon home maintenance checklist.

  • 36°F average low in January, the coldest month
  • November 20 first 32°F night of fall, on average
  • March 24 last 32°F night of spring, on average
  • 4 inches of snow a year

The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.

Before you dig

  • Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Oregon, that's Oregon 811 (Oregon Utility Notification Center).
  • Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
  • Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
  • Don't skip the inspection. Most towns check the open holes before you pour.

Frost line in nearby states

Sources

Frequently asked

How deep is the frost line in Oregon?

The building code puts it at 12 to 24 inches, depending on the county. It comes from the Oregon Residential Specialty Code (2023 ORSC Table R301.2). Your local building department has the final word for your address.

How deep do deck footings need to be in Oregon?

The bottom of each footing has to reach the frost depth: 12 to 24 inches, depending on the county. Measure from the finished grade, not from the top of the post. Oregon's code keeps the model-code exception (IRC R403.1.4.1) for a deck that isn't supported by the house: a free-standing deck can sit on shallower footings. Any deck attached to the house can't.

Does the frost line depth vary within Oregon?

Yes, from 12 to 24 inches. The state's residential code lists a number for every county; the table on this page has them all.

How deep should a water line be buried in Oregon?

Below your local frost line at a minimum, which in Oregon is 12 to 24 inches depending on where you are. Water utilities often require more for the service line from the street, so check with yours, and call 811 before you dig.

When does the ground freeze in Oregon?

Around Portland, the first 32°F night usually comes around November 20 and the last around March 24 (1991–2020 averages). The ground freezes from the top down after weeks of cold, and thaws late, so dig and pour footings before it freezes; never pour concrete on frozen soil.

What happens if a footing is above the frost line?

Frozen soil expands and pushes it up (frost heave), then lets it drop back when it thaws. Over a few winters that racks a deck, tips fence posts, cracks concrete steps and can pull a deck ledger away from the house.

Share this article
Link copied

Keep reading