How deep is the frost line in Washington?

12 to 24 inches, depending on the town. Washington leaves the number to each county or city building department; here's what they publish, and how to get yours.

Get reminded before the ground freezes. I am Home builds your home's seasonal plan from your ZIP in about a minute: winterizing, outdoor faucets, gutters, each with a how-to. Free, every feature.
Get my plan

What building departments in Washington require

Each county or city sets its own frost depth in Washington. These are the values their permit handouts and code pages list; yours may differ, so check before you dig.

PlaceFrost depthSource
Seattle 12 inches seattle.gov
Enumclaw 18 inches cityofenumclaw.net
Spokane and Spokane County · 18 inches for detached accessory buildings 24 inches (2 feet) static.spokanecity.org

Where the number comes from

The Washington State Residential Code leaves the frost depth for each county or city building department to fill in. That's why the same deck can need deeper footings one town over. (WAC 51-51-0301: Table R301.2 criteria are set by the local jurisdiction.)

Western Washington runs shallow: Seattle uses 12 inches and Enumclaw, in the Cascade foothills, 18. Spokane city and county use 24.

Winter in Washington

Averages for Seattle (NOAA 1991–2020 climate normals), the same metro as the Washington home maintenance checklist.

  • 37°F average low in December, the coldest month
  • November 21 first 32°F night of fall, on average
  • March 18 last 32°F night of spring, on average
  • 6 inches of snow a year

The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.

Before you dig

  • Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Washington, that's Washington 811.
  • Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
  • Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
  • Don't skip the inspection. Most towns check the open holes before you pour.

Frost line in nearby states

Sources

Frequently asked

How deep is the frost line in Washington?

There's no statewide number: each county or city building department sets its own, from 12 to 24 inches. Seattle uses 12 inches, Enumclaw 18 and Spokane and Spokane County 24. Check with yours for your address.

How deep do deck footings need to be in Washington?

The bottom of each footing has to reach the frost depth: 12 to 24 inches, set by each county or city. Measure from the finished grade, not from the top of the post. The model code (IRC R403.1.4.1) exempts a deck that isn't supported by the house, but not every town adopts that exception, so ask before you skip it.

How deep should a water line be buried in Washington?

Below your local frost line at a minimum, which in Washington is 12 to 24 inches depending on where you are. Water utilities often require more for the service line from the street, so check with yours, and call 811 before you dig.

When does the ground freeze in Washington?

Around Seattle, the first 32°F night usually comes around November 21 and the last around March 18 (1991–2020 averages). The ground freezes from the top down after weeks of cold, and thaws late, so dig and pour footings before it freezes; never pour concrete on frozen soil.

What happens if a footing is above the frost line?

Frozen soil expands and pushes it up (frost heave), then lets it drop back when it thaws. Over a few winters that racks a deck, tips fence posts, cracks concrete steps and can pull a deck ledger away from the house.

Share this article
Link copied

Keep reading