What building departments in Idaho require
Each county or city sets its own frost depth in Idaho. These are the values their permit handouts and code pages list; yours may differ, so check before you dig.
| Place | Frost depth | Source |
|---|---|---|
| Boise | 24 inches (2 feet) | cityofboise.org |
| Twin Falls | 24 inches (2 feet) | tfid.org |
| Coeur d'Alene | 24 inches (2 feet) | cdaid.org |
| Valley County (outside McCall) | 24 inches (2 feet) | valleycountyid.gov |
Where the number comes from
Idaho has no statewide residential code that sets a frost depth: each county, city or town that adopts a building code fills in its own. That's why the same deck can need deeper footings one town over. (IDAPA 24.39.30 adopts the IRC; local departments fill in Table R301.2(1).)
Every Idaho department we checked uses 24 inches. Eastern Idaho and the mountain towns may go deeper; we couldn't confirm Pocatello or Teton County.
Winter in Idaho
Averages for Boise (NOAA 1991–2020 climate normals), the same metro as the Idaho home maintenance checklist.
- 26°F average low in January, the coldest month
- October 12 first 32°F night of fall, on average
- May 1 last 32°F night of spring, on average
- 17 inches of snow a year
The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.
Before you dig
- Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Idaho, that's Dig Line (Idaho 811).
- Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
- Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
- Don't skip the inspection. Most towns check the open holes before you pour.
Frost line in nearby states
- Montana 36 to 48 inches, set locally
- Oregon 12 to 24 inches by county
- Washington 12 to 24 inches, set locally
- Wyoming 34 to 54 inches, set locally
- Utah 30 to 36 inches, set locally
- Nevada 12 to 36 inches, set locally
- All 50 states and D.C.
Sources
- City of Boise current building codes and design criteria
- Twin Falls residential design criteria
- Coeur d'Alene adopted codes and design criteria (PDF)
- Valley County building permit FAQs
- ICC Idaho adoption page
- International Code Council, 2021 International Residential Code, Chapter 4 (R403.1.4 and R403.1.4.1)
- NOAA NCEI, U.S. Climate Normals 1991–2020