What towns and counties in Connecticut publish
Local building departments repeat the code value in their deck and footing handouts. A few ask for more.
| Place | Frost depth | Source |
|---|---|---|
| Town of Portland (Middlesex County) | 42 inches (3.5 feet) | portlandct.org |
| Meriden | 42 inches (3.5 feet) | meridenct.gov |
Where the number comes from
The Connecticut State Building Code (2022 Connecticut State Building Code, Table R301.2(1) as amended; the 2026 code awaiting approval keeps 42 inches) sets the frost depth for the whole state. Your building department applies it, and can require more where the ground calls for it.
The code keeps the model-code exception for a deck that isn't supported by the house, and lets the footing of stairs at grade stop at 12 inches.
Winter in Connecticut
Averages for Hartford (NOAA 1991–2020 climate normals), the same metro as the Connecticut home maintenance checklist.
- 18°F average low in January, the coldest month
- October 7 first 32°F night of fall, on average
- April 25 last 32°F night of spring, on average
- 41 inches of snow a year
The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.
Before you dig
- Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Connecticut, that's Call Before You Dig (CBYD) Connecticut.
- Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
- Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
- Don't skip the inspection. Most towns check the open holes before you pour.
Frost line in nearby states
- Massachusetts 48 inches statewide
- New York 42 to 48 inches, set locally
- Rhode Island 40 inches statewide
- New Jersey 30 to 36 inches by zone
- Vermont no state code for houses; 60 inches for public and rental buildings
- All 50 states and D.C.
Sources
- 2022 Connecticut State Building Code as resubmitted to the Legislative Regulation Review Committee
- 2026 CSBC draft for LRRC review (Dec 2, 2025): Table R301.2 frost line depth 42"
- CT DAS code adoption page: 2026 code still awaiting LRRC approval, effective date delayed
- Town of Portland (Middlesex County): building department
- Meriden: building department
- International Code Council, 2021 International Residential Code, Chapter 4 (R403.1.4 and R403.1.4.1)
- NOAA NCEI, U.S. Climate Normals 1991–2020