How deep is the frost line in Vermont?

Vermont has no building code for owner-occupied houses, so no state frost depth applies to a home. The state code for public and rental buildings puts footings at least 60 inches (5 feet) below grade: ask your town, and use that as your guide.

Get reminded before the ground freezes. I am Home builds your home's seasonal plan from your ZIP in about a minute: winterizing, outdoor faucets, gutters, each with a how-to. Free, every feature.
Get my plan

What we could confirm

The published values we found, each linked to its source.

PlaceFrost depthSource
State code (public and rental buildings) 60 inches (5 feet) barrecity.org

Where the number comes from

Vermont Fire and Building Safety Code: IBC 1809.5 as amended by the state: at least 5 feet below finished grade, for public and rental buildings.

Burlington, Barre City and Rutland enforce the state code citywide, but it sends one- and two-family homes to the life-safety code, which sets no frost depth. None of the ten towns we checked publishes a depth for houses.

Winter in Vermont

Averages for Burlington (NOAA 1991–2020 climate normals), the same metro as the Vermont home maintenance checklist.

  • 11°F average low in January, the coldest month
  • October 5 first 32°F night of fall, on average
  • May 5 last 32°F night of spring, on average
  • 70 inches of snow a year

The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.

Before you dig

  • Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Vermont, that's Dig Safe (Vermont 811 center).
  • Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
  • Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
  • Don't skip the inspection. Most towns check the open holes before you pour.

Frost line in nearby states

Sources

Frequently asked

How deep is the frost line in Vermont?

Vermont has no building code for owner-occupied houses, so no state frost depth applies to a home. The state code for public and rental buildings puts footings at least 60 inches (5 feet) below grade: ask your town, and use that as your guide.

How deep do deck footings need to be in Vermont?

The bottom of each footing has to reach the frost depth: whatever your town requires; the state's own code uses 60 inches where it applies. Measure from the finished grade, not from the top of the post. The model code (IRC R403.1.4.1) exempts a deck that isn't supported by the house, but not every town adopts that exception, so ask before you skip it.

How deep should a water line be buried in Vermont?

Below your local frost line at a minimum, which in Vermont is 60 inches depending on where you are. Water utilities often require more for the service line from the street, so check with yours, and call 811 before you dig.

When does the ground freeze in Vermont?

Around Burlington, the first 32°F night usually comes around October 5 and the last around May 5 (1991–2020 averages). The ground freezes from the top down after weeks of cold, and thaws late, so dig and pour footings before it freezes; never pour concrete on frozen soil.

What happens if a footing is above the frost line?

Frozen soil expands and pushes it up (frost heave), then lets it drop back when it thaws. Over a few winters that racks a deck, tips fence posts, cracks concrete steps and can pull a deck ledger away from the house.

Share this article
Link copied

Keep reading