What building departments in Alaska require
Each county or city sets its own frost depth in Alaska. These are the values their permit handouts and code pages list; yours may differ, so check before you dig.
| Place | Frost depth | Source |
|---|---|---|
| Anchorage · for heated foundations; unheated footings, including deck posts, go 60 to 120 inches | 42 inches (3.5 feet) | muni.org |
| Fairbanks | 42 inches (3.5 feet) | files.aptuitivcdn.com |
Where the number comes from
Alaska has no statewide residential code that sets a frost depth: each county, city or town that adopts a building code fills in its own. That's why the same deck can need deeper footings one town over. (Anchorage: AMC 23.85, Table R403.1; elsewhere the local building department, where there is one.)
In permafrost areas, common in interior and northern Alaska, code depths don't cover the risk: footings there need site-specific engineering.
Winter in Alaska
Averages for Anchorage (NOAA 1991–2020 climate normals), the same metro as the Alaska home maintenance checklist.
- 12°F average low in January, the coldest month
- September 25 first 32°F night of fall, on average
- May 5 last 32°F night of spring, on average
- 78 inches of snow a year
The ground freezes from the top down after weeks of cold and thaws late, often weeks after the last frost. Snow on the ground slows it, while a plowed driveway or a bare, windswept yard freezes deeper. Dig and pour footings before the ground freezes: concrete must never go onto frozen soil, which settles when it thaws.
Before you dig
- Call 811 a few days ahead. It's free: utilities mark their buried lines before you dig. In Alaska, that's Alaska 811.
- Get the number from your building department. Search its site for a deck or footing handout, or call the permit desk. Ask about the footing size too: the frost depth says how deep, not how wide.
- Measure to the bottom of the footing. From finished grade, after any regrading. The concrete footing sits at the bottom of the hole, so with a 36-inch frost depth the hole itself is at least 36 inches deep.
- Don't skip the inspection. Most towns check the open holes before you pour.
Frost line in nearby states
- Washington 12 to 24 inches, set locally
- Oregon 12 to 24 inches by county
- Idaho 24 inches, set locally
- Montana 36 to 48 inches, set locally
- North Dakota 48 to 54 inches, set locally
- All 50 states and D.C.
Sources
- AHFC Alaska Minimum Construction Standards
- AHFC 2018 IRC Alaska-specific amendments (PDF)
- Anchorage AMC 23.85 local IRC amendments, 2018 archive (PDF)
- Fairbanks building code information
- ICC Alaska adoption page
- Fairbanks: building department
- International Code Council, 2021 International Residential Code, Chapter 4 (R403.1.4 and R403.1.4.1)
- NOAA NCEI, U.S. Climate Normals 1991–2020